Printable Download · Free or $7
DTF Settings Template — Printable
The whole DTF chain on a page you can print: cure, pre-press, final press, peel, and second press — plus a fill-in log for the film and powder you actually use. Get the free 1-page chart, or the full printable Settings Pack with three logs for $7.
Quick answer
Printable DTF starting points: cure / powder melt 250–270°F until shiny & fully melted · pre-press garment ~5 s · final press 300–320°F / 10–15 s, medium-firm · peel hot or cold per film · second press 5–10 s. The cure is judged by eye, not the clock. Every value is a starting point — test on a scrap first.
The Ultimate Craft Press Settings Pack
Full DTF template plus sublimation, UV DTF, HTV & airbrush — and 3 printable logs, including a material-test sheet for new film & powder.
Get the Settings Pack — $7 →Want the basics first? Download the free 1-page cheat sheet →
The DTF settings template
Print this as your stage-by-stage reference. DTF is a sequence, not a single press.
| Stage | Setting (starting point) |
|---|---|
| Cure / powder melt oven or hover press | 250–270°F (120–130°C) until shiny & fully melted |
| Pre-press garment | ~5 s to flatten + remove moisture |
| Final press film on garment | 300–320°F (150–160°C) · 10–15 s · medium-firm |
| Peel | Hot or cold — per your film |
| Second press | 5–10 s to set the print & soften the hand |
Common starting points across the DTF chain. Hot peel vs cold peel is not universal — match it to your film.
The fill-in DTF log (in the pack)
A template is only half the job — the other half is recording what worked for your exact film and powder. The pack's printable log gives you these columns:
- Film & powder brand
- Cure look / time
- Final press temp
- Press time
- Pressure
- Peel (hot / cold)
- Second press
- Wash-test result
Why a printable beats guessing
DTF has more places to go wrong than any other method, because it is five steps, not one. Miss the cure and the print cracks; skip the pre-press and it lifts; forget the second press and the hand stays rough. A printed template walks you through each stage in order so nothing gets skipped on a busy gang-sheet day — and a fill-in log turns the brand-specific quirks of your film into a recorded recipe you can repeat.
Frequently asked questions
Is there a printable DTF settings template to download? +
Yes. The free 1-page cheat sheet includes the DTF chain. For a full printable template plus a fill-in log to record your film, powder and press numbers — along with four other methods — the $7 Settings Pack is an instant PDF with lifetime access.
What DTF settings go on the template? +
Cure or powder melt at 250–270°F (120–130°C) until shiny and fully melted, pre-press the garment ~5 seconds, final press the film at 300–320°F (150–160°C) for 10–15 seconds with medium-firm pressure, peel hot or cold per your film, then a second press of 5–10 seconds.
Why does a fill-in DTF log matter? +
DTF varies a lot by film and powder brand, so the printed numbers are starting points. A fill-in log records the cure look, press temp, time, pressure and peel that worked for your supplies, so the next gang sheet is a repeat instead of a re-test. See the cracking / peeling fix if a print fails.
Is the printable DTF template an instant download? +
Yes. The free cheat sheet downloads immediately with no email. The $7 Settings Pack is also an instant digital PDF — link at checkout, lifetime access, and the card statement shows CONTENTFORGE.
Print the DTF chain. Skip nothing.
Every stage in order, plus a fill-in log so your best film-and-powder recipe is one you can repeat.
Get the Settings Pack — $7Instant download · printable · lifetime access · or grab the free 1-page sheet